Please feel free to browse our extensive range of Spinal Instruments, Implants and Bone products available to both the NHS and Private Hospital Sector for direct purchase or on a hire basis. A few of our brands include Joimax, Medicon, Spinal Kinetics, Implanet, Edge and Allograft – all in which comply with current traceability legislation and GS1 code practise.
-
Integra Mozaik is a collagen ceramic osteoconductive scaffold which is engineered to mimic the composition and structure of natural bone. Mozaik is made up of 80% purified beta-TCP granules & 20% Highly purified type-1 collagen. The TCP provides bone void filling structure whilst the collagen enables a bioactive element inductive to bone growth, an ideal combination. Mozaik is available in two forms in various sizes: Strips & Putties.
Compression Resistant Strip
- Retains bioactive fluids within scaffold to facilitate protein binding.
- Maintains graft volume under compression.
- Bends to conform to uneven surfaces.
Moldable Putty
- Excellent handling and moldability.
- Optimal for placement in irregularly shaped defect sites.
-
Orthoblast II is a powerful choice of bone grafting and it is what is termed a “complete” bone graft, offering both conductivity and inductivity to the user Surgeon. It is available as a Putty in a tub where the conductive bone graft granules mixed in with the DBM Putty are larger given the method of delivery. This is a crunchy graft when handled by the Surgeon. The other method of delivery with this product is via a syringe, where the conductive granules are slightly smaller simply because they need to go through the tip of the syringe. This is no less a complete bone graft however, it is simply another method of delivery for the Surgeon, and contains demineralized bone matrix (DBM) to stimulate and regenerate new bone growth. It is a highly inductive material supplied in syringe form (smaller particulate bone granules) and in tub form (larger particulate bone granules). OrthoBlast® II therefore, combines demineralized allograft bone with cancellous bone in a reverse phase medium (RPM) carrier, to provide an osteoconductive & Inductive allograft with ideal handling qualities. OrthoBlast II has enjoyed clinical success in a variety of surgical applications including periarticular defects and long-bone defects. An independent study of two DBM allografts, in cases of metaphyseal and periarticular fractures, concluded that the OrthoBlast II success rate was over 30% higher than the alternative allograft product. In another independent study of the use of DBM allograft products in ankle/hindfoot fusion, 14% of patients with a glycerol based allograft developed a non-union, versus only 8% for the OrthoBlast patients. We offer a 24 hour delivery service for this product.
-
Accell Connexus is highly inductive 2nd Generation DBM with a DBM content of close to 70%. It is sold in a syringe form and also contains the unique RPM carrier which is also an inductive material, giving it exceptional handling characteristics. Accell Connexus should be mixed with any Allograft, Autograft or a synthetic scaffold to provide the ideal recipe for fusion – of conductivity and inductivity. Accell Technology features a patented process that produces the Accell bone matrix (ABM) which is an open-structured, dispersed form of Dynamic Bone Matrix (DBM). The ABM study uses a skeletally mature sheep model with cylindrical 5mm metatarsal defect which is created in tibial diaphysis and which shows excellent results after 4 weeks. This product benefits from validated osteoinductive potential, is mouldable and easy to pack into defects making it ready to use. Case studies have shown positive results when used in:
- Spine: Intertransverse process fusion
- Hand: Cystic scaphoid nonunion
- Foot & Ankle: - Tibial osteotomy - Hindfoot and ankle nonunions
Accell Connexus Varients
Connexus Putty 0.5cc - Syringe Connexus Putty 1cc – Syringe Connexus Putty 5cc – Syringe Connexus Putty 10cc – Syringe We use a guaranteed 24 hour delivery service for this product. -
Allograft bone is an ideal alternative to autograft for quick, complete bone regeneration. Cancellous chips and granules form the Osteoconductive scaffold for new bone formation while maintaining the porosity essential for tissue and vascular regrowth. Cancellous Bone packs well into any size or shape defect, for maximum surgical flexibility and is available for immediate use with no refrigeration or thawing required. Potential complications of iliac crest bone harvesting, such as morbidity, limited supply, and pain, make Cancellous bone an ideal autograft substitute which has been obtained from an AATB-Accredited Tissue Bank, ensuring the highest quality bone through rigorous donor screening, testing and sterilisation. In many cases, cancellous bone is preferable to cortical bone due to its higher surface area and open porous structure that allows for easy cellular penetration and incorporation and is a perfect compliment to IsoTis’ Accell® product line, and can be used as a bone graft extender or for composite grafting. We supply Allograft Cancellous Bone in a variety of sizes which can be purchased in chip or crushed formation - please see the tab below for further information. We use a guaranteed 24 hour delivery service for this product.
-
The Jazz™ systems (which includes the Jazz™ Claw Connector) are temporary spinal implants specifically designed to provide a bone anchor for temporary stabilisation during the development of solid bony fusion to assist with the repair of bone fractures. The Jazz™ systems can be used for a number of spinal surgeries:
- Spinal trauma surgery
- Spinal reconstructive surgery
- Spinal degenerative surgery
-
We supply a wide range of articulated joint repair ligaments and tendons including:All of our tendons and ligaments undergo a rigorous Supercritical CO2 Sterilisation Process which is explained in further detail below.
- Patella Tendon Whole
- Patella Tendon Hemi
- Pre-Shaped Patella Tendon
- Achilles Tendon w/Bone Block
- Achilles Tendon w/out Bone Block
- Pre-Shaped Achilles Tendon w/Bone Block
- Gracilis Tendon
- Semitendinosus Tendon
- Semitendinosus-Gracilis Tendon
- Tibialis Tendon Anterior
- Tibialis Tendon Posterior
- Peroneus Longus
-
The Seaspine Strand is made from 100% demineralised bone fibres and is designed to encourage bone growth. Developed through a disciplined R&D procedure, the Strand has evaluated a variety of fibre geometries to deliver osteoinductivity, osteoconductivity, intraoperative handling, and controlled expansion. The Seaspine Strand Plus is powered by Accell® Bone Matrix (ABM) which provides both immediate and sustained release of growth factors. Key Features for the Strand:
- 100% Demineralised Bone Fibres
- Expands to Fill Gaps
- Cellular Highways
- Simplicity of Hydration
- 100% Demineralised Bone Fibres with ABM
- 100% Demineralised Bone Fibres
- Expands to Fill Gaps
- Cellular Highways
- Simplicity of Hydration
-
For painful bone tumours
The OsteoCoolTM RF Ablation System is cooled radiofrequency (RF) ablation technology. It offers simultaneous, dual-probe capabilities for treating painful bone tumours. Product DetailsThe OsteoCool RF Ablation system is cooled radiofrequency (RF) ablation technology. It offers simultaneous, dual-probe capabilities for treating painful bone tumours.
Coaxial, bipolar technology delivers RF energy to the site, and automatically moderates power to keep RF heating within the desired treatment range. This reduces risk of potential thermal damage to adjacent tissue.1
The active tip of the ablation probe is internally cooled with circulating water. RF energy heats the tissue while circulating water moderates the temperature close to the active tip. This combination:
- Creates large volume lesions without excessive heating at the active tip
- Minimises potential for char
The OsteoCool RF ablation probes are sterile and intended for single use.
1 Based on internal testing. Data on file.
-
The MediExpand is a one or multi-segmental corpectomy device designed to reconstruct the cervical spine. The implant has an adjustable size increase system which can be adapted to suit the anatomical condition of the patient. Its innovative design reduces the risk of sinking adjacent vertebral bodies and secures anchoring in the adjoining endplates. Featuring an open design the mediExpand offers excellent visibility of the dura during insertion and provides direct access areas for freshening unaffected endplate areas. The large surface area is ideal for bony fusion and offers optimal space for filling up with spongiosa, whilst following the 'guide-rail' principle. The anatomical design provides the reconstruction of the lordotic profile with simple repositioning of the implant by reversing the distraction and allows for individual treatment due to the ability to choose exact height settings.